Man Linux: Main Page and Category List

NAME

       es2ts - convert ES to TS

SYNOPSIS

       es2ts [switches] <infile> <outfile>

DESCRIPTION

              TS tools version 1.11, es2ts built Nov 11 2008 17:15:46

              Convert  an  elementary  video stream to H.222 transport stream.
              Supports input streams conforming to MPEG-2 (H.262),  MPEG-4/AVC
              (H.264)  and AVS. Also supports MPEG-1 input streams, insofar as
              MPEG-2 is backwards compatible with MPEG-1.

              Note that this  program  works  by  reading  and  packaging  the
              elementary  stream packages directly - it does not parse them as
              H.262 or H.264 data.

   Files:
       <infile>
              is a file containing the Elementary Stream data (but see  -stdin
              below)

       <outfile>
              is  an  H.222  Transport  Stream file (but see -stdout and -host
              below)

   Switches:
       -pid <pid>
              <pid> is the video PID to use for the data.  Use ’-pid  0x<pid>’
              to specify a hex value.  Defaults to 0x68.

       -pmt <pid>
              <pid>  is  the  PMT PID to use.  Use ’-pmt 0x<pid>’ to specify a
              hex value.  Defaults to 0x66

       -verbose, -v
              Output summary information about each ES packet as it is read

       -quiet, -q
              Only output error messages

       -stdin Take input from <stdin>, instead of a named file

       -stdout
              Write output to <stdout>, instead of a named file Forces -quiet.

       -host <host>, -host <host>:<port>
              Writes output (over TCP/IP) to the named <host>, instead of to a
              named file. If <port> is not specified, it defaults to 88.

       -max <n>, -m <n>
              Maximum number of ES data units to read

   Stream type:
              When the TS data is being output,  it  is  flagged  to  indicate
              whether  it  conforms to H.262, H.264 or AVS. It is important to
              get this right, as it will affect interpretation of the TS data.

              If input is from a file, then the program will look at the start
              of the file to determine if the stream is H.264, H.262  or  AVS.
              This  process  may occasionally come to the wrong conclusion, in
              which case the user can override the choice using the  following
              switches.

              If  input  is  from  standard input (via -stdin), then it is not
              possible for the program to make its own decision on  the  input
              stream  type.   Instead, it defaults to H.262, and relies on the
              user indicating if this is wrong.

       -h264, -avc
              Force the program to treat the input as MPEG-4/AVC.

       -h262  Force the program to treat the input as MPEG-2.

       -avs   Force the program to treat the input as AVS.

              TS tools version 1.11, es2ts built Nov 11 2008 17:15:46

              Convert an elementary video stream to  H.222  transport  stream.
              Supports  input streams conforming to MPEG-2 (H.262), MPEG-4/AVC
              (H.264) and AVS. Also supports MPEG-1 input streams, insofar  as
              MPEG-2 is backwards compatible with MPEG-1.

              Note  that  this  program  works  by  reading  and packaging the
              elementary stream packages directly - it does not parse them  as
              H.262 or H.264 data.

   Files:
       <infile>
              is  a file containing the Elementary Stream data (but see -stdin
              below)

       <outfile>
              is an H.222 Transport Stream file (but  see  -stdout  and  -host
              below)

   Switches:
       -pid <pid>
              <pid>  is the video PID to use for the data.  Use ’-pid 0x<pid>’
              to specify a hex value.  Defaults to 0x68.

       -pmt <pid>
              <pid> is the PMT PID to use.  Use ’-pmt 0x<pid>’  to  specify  a
              hex value.  Defaults to 0x66

       -verbose, -v
              Output summary information about each ES packet as it is read

       -quiet, -q
              Only output error messages

       -stdin Take input from <stdin>, instead of a named file

       -stdout
              Write output to <stdout>, instead of a named file Forces -quiet.

       -host <host>, -host <host>:<port>
              Writes output (over TCP/IP) to the named <host>, instead of to a
              named file. If <port> is not specified, it defaults to 88.

       -max <n>, -m <n>
              Maximum number of ES data units to read

   Stream type:
              When  the  TS  data  is  being output, it is flagged to indicate
              whether it conforms to H.262, H.264 or AVS. It is  important  to
              get this right, as it will affect interpretation of the TS data.

              If input is from a file, then the program will look at the start
              of  the  file to determine if the stream is H.264, H.262 or AVS.
              This process may occasionally come to the wrong  conclusion,  in
              which  case the user can override the choice using the following
              switches.

              If input is from standard input (via -stdin),  then  it  is  not
              possible  for  the program to make its own decision on the input
              stream type.  Instead, it defaults to H.262, and relies  on  the
              user indicating if this is wrong.

       -h264, -avc
              Force the program to treat the input as MPEG-4/AVC.

       -h262  Force the program to treat the input as MPEG-2.

       -avs   Force the program to treat the input as AVS.

SEE ALSO

       The  full  documentation  for  es2ts is maintained as a Texinfo manual.
       Please check http://tstools.berlios.de for more information.