NAME
snd_mss - Microsoft Sound System ISA PnP/non-PnP bridge device driver
SYNOPSIS
To compile this driver into the kernel, place the following lines in your
kernel configuration file:
device sound
device snd_mss
Alternatively, to load the driver as a module at boot time, place the
following line in loader.conf(5):
snd_mss_load="YES"
Non-PnP cards require the following lines in device.hints(5):
hint.pcm.0.at="isa"
hint.pcm.0.irq="10"
hint.pcm.0.drq="1"
hint.pcm.0.flags="0x0"
DESCRIPTION
The snd_mss bridge driver allows the generic audio driver, sound(4), to
attach to the supported audio devices.
HARDWARE
The snd_mss driver supports the following audio devices:
· AD1845
· AD1848
· Aztech 2320
· CMedia CMI8330
· Crystal Semiconductor CS4231
· Crystal Semiconductor CS4232
· Crystal Semiconductor CS4234
· Crystal Semiconductor CS4235
· Crystal Semiconductor CS4236
· Crystal Semiconductor CS4237
· ENSONIQ SoundscapeVIVO ENS4081
· NeoMagic 256AV (non-AC97)
· OPTi 924
· OPTi 925
· OPTi 930
· OPTi 931
· OPTi 933
· Yamaha OPL-SA2
· Yamaha OPL-SA3
SEE ALSO
sound(4)
HISTORY
The snd_mss device driver first appeared in FreeBSD 2.2.6.
AUTHORS
This manual page was written by Joel Dahl 〈joel@FreeBSD.org〉.