Man Linux: Main Page and Category List

NAME

       XFillRectangle, XFillRectangles, XFillPolygon, XFillArc, XFillArcs -
       fill rectangles, polygons, or arcs

SYNTAX

       int XFillRectangle(Display *display, Drawable d, GC gc, int x, int y,
              unsigned int width, unsigned int height);

       int XFillRectangles(Display *display, Drawable d, GC gc, XRectangle
              *rectangles, int nrectangles);

       int XFillPolygon(Display *display, Drawable d, GC gc, XPoint *points,
              int npoints, int shape, int mode);

       int XFillArc(Display *display, Drawable d, GC gc, int x, int y,
              unsigned int width, unsigned int height, int angle1, int
              angle2);

       int XFillArcs(Display *display, Drawable d, GC gc, XArc *arcs, int
              narcs);

ARGUMENTS

       angle1    Specifies the start of the arc relative to the three-o’clock
                 position from the center, in units of degrees * 64.

       angle2    Specifies the path and extent of the arc relative to the
                 start of the arc, in units of degrees * 64.

       arcs      Specifies an array of arcs.

       d         Specifies the drawable.

       display   Specifies the connection to the X server.

       gc        Specifies the GC.

       mode      Specifies the coordinate mode.  You can pass CoordModeOrigin
                 or CoordModePrevious.

       narcs     Specifies the number of arcs in the array.

       npoints   Specifies the number of points in the array.

       nrectangles
                 Specifies the number of rectangles in the array.

       points    Specifies an array of points.

       rectangles
                 Specifies an array of rectangles.

       shape     Specifies a shape that helps the server to improve
                 performance.  You can pass Complex, Convex, or Nonconvex.

       width
       height    Specify the width and height, which are the dimensions of the
                 rectangle to be filled or the major and minor axes of the
                 arc.

       x
       y         Specify the x and y coordinates, which are relative to the
                 origin of the drawable and specify the upper-left corner of
                 the rectangle.

DESCRIPTION

       The XFillRectangle and XFillRectangles functions fill the specified
       rectangle or rectangles as if a four-point FillPolygon protocol request
       were specified for each rectangle:

       [x,y] [x+width,y] [x+width,y+height] [x,y+height]

       Each function uses the x and y coordinates, width and height
       dimensions, and GC you specify.

       XFillRectangles fills the rectangles in the order listed in the array.
       For any given rectangle, XFillRectangle and XFillRectangles do not draw
       a pixel more than once.  If rectangles intersect, the intersecting
       pixels are drawn multiple times.

       Both functions use these GC components: function, plane-mask, fill-
       style, subwindow-mode, clip-x-origin, clip-y-origin, and clip-mask.
       They also use these GC mode-dependent components: foreground,
       background, tile, stipple, tile-stipple-x-origin, and tile-stipple-y-
       origin.

       XFillRectangle and XFillRectangles can generate BadDrawable, BadGC, and
       BadMatch errors.

       XFillPolygon fills the region closed by the specified path.  The path
       is closed automatically if the last point in the list does not coincide
       with the first point.  XFillPolygon does not draw a pixel of the region
       more than once.  CoordModeOrigin treats all coordinates as relative to
       the origin, and CoordModePrevious treats all coordinates after the
       first as relative to the previous point.

       Depending on the specified shape, the following occurs:

       ·    If shape is Complex, the path may self-intersect.  Note that
            contiguous coincident points in the path are not treated as self-
            intersection.

       ·    If shape is Convex, for every pair of points inside the polygon,
            the line segment connecting them does not intersect the path.  If
            known by the client, specifying Convex can improve performance.
            If you specify Convex for a path that is not convex, the graphics
            results are undefined.

       ·    If shape is Nonconvex, the path does not self-intersect, but the
            shape is not wholly convex.  If known by the client, specifying
            Nonconvex instead of Complex may improve performance.  If you
            specify Nonconvex for a self-intersecting path, the graphics
            results are undefined.

       The fill-rule of the GC controls the filling behavior of self-
       intersecting polygons.

       This function uses these GC components: function, plane-mask, fill-
       style, fill-rule, subwindow-mode, clip-x-origin, clip-y-origin, and
       clip-mask.  It also uses these GC mode-dependent components:
       foreground, background, tile, stipple, tile-stipple-x-origin, and tile-
       stipple-y-origin.

       XFillPolygon can generate BadDrawable, BadGC, BadMatch, and BadValue
       errors.

       For each arc, XFillArc or XFillArcs fills the region closed by the
       infinitely thin path described by the specified arc and, depending on
       the arc-mode specified in the GC, one or two line segments.  For
       ArcChord, the single line segment joining the endpoints of the arc is
       used.  For ArcPieSlice, the two line segments joining the endpoints of
       the arc with the center point are used.  XFillArcs fills the arcs in
       the order listed in the array.  For any given arc, XFillArc and
       XFillArcs do not draw a pixel more than once.  If regions intersect,
       the intersecting pixels are drawn multiple times.

       Both functions use these GC components: function, plane-mask, fill-
       style, arc-mode, subwindow-mode, clip-x-origin, clip-y-origin, and
       clip-mask.  They also use these GC mode-dependent components:
       foreground, background, tile, stipple, tile-stipple-x-origin, and tile-
       stipple-y-origin.

       XFillArc and XFillArcs can generate BadDrawable, BadGC, and BadMatch
       errors.

DIAGNOSTICS

       BadDrawable
                 A value for a Drawable argument does not name a defined
                 Window or Pixmap.

       BadGC     A value for a GContext argument does not name a defined
                 GContext.

       BadMatch  An InputOnly window is used as a Drawable.

       BadMatch  Some argument or pair of arguments has the correct type and
                 range but fails to match in some other way required by the
                 request.

       BadValue  Some numeric value falls outside the range of values accepted
                 by the request.  Unless a specific range is specified for an
                 argument, the full range defined by the argument’s type is
                 accepted.  Any argument defined as a set of alternatives can
                 generate this error.

SEE ALSO

       XDrawArc(3), XDrawPoint(3), XDrawRectangle(3)
       Xlib - C Language X Interface